June 14, 2017
Share Via Facebook Via Twitter/X Via Pinterest via linkedin
Paver blocks are a great way to establish a patio or any number of other hardscapes in the yard due to their considerable strength and durability. They also allow for a huge choice of colors and design patterns that no alternatives can match. Still, weather, hard impacts, improper installation, and chemical staining can take their toll. While major damage calls for brick paver professional aid, replacing a few pavers is something the homeowner can perform using these steps.
Having a replacement block of the right hue and dimensions is pretty obvious, but there are a few more things that should be standing by.
Not all of these items may be needed for a particular job replacing a paver. Check the following steps to see if certain articles listed above are required for the preferred course of action.
If the space around the targeted paver is filled with sand, used the screwdriver to push it out while using the broom to sweep it away. If mortar has been used instead of sand, a hammer and chisel can separate it from the adjacent blocks. The common way to remove a paver is to use a screwdriver to pry it up so it can be manually grasped. Alternatively, a couple of stiff coat hanger wires can be used. Bend enough of the top length of each wire to a 90-degree angle to form a handle. Next, bend one inch of the bottom at a 90-degree angle in the opposite direction. These tools can then be slid along each side of the block and turned inward to lift the block from below.
With the block out of the way, the hammer and chisel are used to knock mortar off surrounding blocks if necessary. Use the ruler to compare the thickness of the new paver to the sides of the open space. If needed, add enough sand to leave the new paver level with the surrounding blocks and use the old paver to pack it down.
Next, drop the new paver into place. Either sand or mortar is then poured into the gaps around the new paver. The chisel can be used to pack down the sand so rain won’t easily wash it out.
Applying sealant can prolong the survival of the new pavers by creating a barrier against discoloration by sunlight, chemicals or even water that can freeze. Make sure the sealant creates the same appearance (glossy, matte or wet) as that of the surrounding blocks before applying it with a paint roller.
Big hardscape structures (like patios or walkways) look intimidating, but this instructional showed how remarkably simple it is to get things back in order if a paver or two needs replacing. However, if you’ve bitten off a little more than you can chew, give us a call at Twin Oaks Landscape. We’ll get your pavers looking great again.
Our experienced and talented team of landscapers can take care of even the biggest projects. Contact us today, and let’s start talking about your new landscape!
Get Your Estimate
While you created a beautiful landscape to enjoy, it can sometimes feel like you’ve given yourself an endless amount of work. There’s always something to do on
As a homeowner, your outdoor space holds immense potential to become a beautiful, functional extension of your home. The possibilities are endless, whether it's a
Preparing your yard for the harsh conditions ahead is essential as winter approaches. Proper winter landscape maintenance is necessary to protect your plants,
Exposed utility boxes, air conditioning units, and generators can be major eyesores, disrupting your meticulously landscaped yard's tranquility and aesthetic appeal.
